Internet Speed Test
Test your real download and upload speed and ping, live, in about 15 seconds.
- Free
- No signup
- Nothing uploaded
- No watermark
Press GO: about 15 seconds for download, upload and ping.
Download
–
Upload
–
Ping
–
Jitter
–
Server: the nearest Cloudflare speed test location
Your last tests
Your results will show here after the first test.
Tests run against Cloudflare’s public speed test servers with test data only. ToolXkit stores nothing; your last results stay in this browser.
How to Use the Internet Speed Test Online
Internet Speed Test measures your connection live, the way fast.com and Speedtest do: several downloads at once for a few seconds, then uploads, counting the data as it arrives. You see download and upload in Mbps (or MB/s), ping and jitter, then plain notes on what the speed is good for — 4K streaming, video calls, games — and how it compares with the plan you pay for.
Measures your real download and upload speed and ping live against the nearest Cloudflare server, then says in plain words what the line is good for.
No software to install Free Works on any device
Step-by-Step Guide to Using the Internet Speed Test
-
1. Press Start speed test
-
2. Watch the download, then upload, figure climb live
-
3. Read the notes under the result — and enter your plan's speed to see the share you get
What is the Internet Speed Test?
Measures your real download and upload speed and ping live against the nearest Cloudflare server, then says in plain words what the line is good for.
At a glance
- Measures: Download, upload, ping, jitter
- Server: Nearest Cloudflare location
- Time: About 15 seconds (Quick) or 25 seconds (Thorough)
- Units: Mbps or MB/s
- History: Last 6 results, kept in this browser
Why Use IP and Network Calculators?
Subnet masks, CIDR ranges and download times all come down to binary maths that is easy to slip on. These calculators do the sums in the page, so you can plan an address range or check a speed claim with confidence.
“One wrong subnet mask can take a whole office offline.”
- Subnets worked out instantly
- CIDR ranges made clear
- Download times estimated
- Browser details revealed
- Usable host counts shown
- IPv4 and IPv6 conversions
- MAC addresses checked
- No commands to install
Popular Uses for Subnet Calculators
Network jobs at home and at work often start with one of these sums.
- Planning an office network Split an address block into subnets for each floor, team or guest WiFi.
- Reading CIDR notation See the first address, last address and host count behind a range like /24.
- Download estimates Work out how long a large file will take on a given connection speed.
- Speed claims Turn megabits per second into megabytes to see what a plan really delivers.
- Device lookups Find the maker of a network card from its MAC address prefix.
- Browser checks See your user agent and browser details when a support team asks.
- WebSocket tests Connect to a WebSocket endpoint and watch messages go back and forth.
- IPv6 planning Convert an IPv4 address into IPv6 form while preparing a migration.
What You Can Do with the Internet Speed Test
Shows the network, broadcast and usable host range together, which is the whole answer
Handles IPv6 at full length rather than truncating it for display
Why Use ToolXkit for Internet Speed Test?
Your files stay with you
Everything runs inside your browser. Nothing you open or type is uploaded to a server.
Free, with no catch
No signup, no watermark and no daily limit on how often you use it.
Fast
Results appear in seconds, because nothing has to travel over the internet and back.
Works on any device
Use it on a computer, tablet or phone, in Chrome, Edge, Firefox or Safari.
Nothing to install
No app, no extension and no desktop program. Open the page and start.
Made for real people
Plain words and clear buttons, built by one developer who wanted tools like this to exist.
Network Tools for Different Users
Network administrators
Plan subnets, check CIDR ranges and size links for expected bandwidth.
Networking students
Practise subnetting for CCNA and other exams, and check answers quickly.
Developers
Test WebSocket servers, parse user agents and inspect TCP header fields.
IT support staff
Collect browser details and estimate transfer times while helping users.
Small office owners
Understand router settings and IP ranges without calling a technician every time.
Streamers and gamers
Check upload speed, latency and packet loss figures before a stream.
Best Times to Work Out a Subnet
Network calculators help when you are:
- Setting up a new router
- Studying for a networking exam
- Adding a guest WiFi network
- Estimating a large upload
- Comparing broadband plans
- Identifying an unknown device
- Moving to IPv6
- Debugging a WebSocket connection
Tips and Good to Know
-
It measures this device on this connection right now; other devices using the line at the same time lower the result.
-
VPNs, ad blockers and work or school firewalls can slow or block the test.
-
Very fast lines (over 1 Gbps) may read lower in a browser than in a dedicated app.
Frequently Asked Questions
Answers to common questions about this tool.
Why is my speed lower than the plan I pay for?
Plans are sold as the speed to your router. Wi-Fi, especially through walls or far from the router, often delivers 50–70% of it. Test again on a cable next to the router; if that is still well under the plan, show the result to your provider.
What is the difference between Mbps and MB/s?
Internet plans are sold in megabits a second (Mbps). Downloads in a browser show megabytes a second (MB/s). One byte is eight bits, so 100 Mbps downloads at about 12.5 MB/s.
What is a good ping?
Under 20 ms is excellent, under 50 ms is good for games and calls, and over 100 ms feels laggy. Jitter is how much ping varies; under 10 ms keeps calls smooth.
How much data does one test use?
It depends on your speed: roughly 10–50 MB on a phone connection and a few hundred MB on fast fibre. The amount is shown after each test. On a metered plan, use the Quick length.
Which server does it test against?
Cloudflare’s public speed test network, the location nearest to you (shown under the result). ToolXkit itself stores nothing; your last results are kept only in this browser.
Is Internet Speed Test accurate enough for real network work?
The maths behind addresses and ranges is exact, so the results match what a router expects. Double-check the input, especially the prefix length, since one wrong digit changes the whole range.
Do the calculators scan my network?
No. The subnet and speed calculators only work with the numbers you type in. They send no traffic into your network, and the only tool that connects anywhere is the WebSocket Tester, to the address you enter.
Why is my real download slower than the estimate?
The calculator assumes the full connection speed is available. In practice, WiFi, other devices, server limits and protocol overhead eat into it, so real downloads often take somewhat longer.
Is Internet Speed Test free and private?
Yes. It costs nothing and needs no account. What you type stays in your browser and is never sent to ToolXkit, which matters when it describes a real company network.
Further reading
- RFC 4632: CIDR (IETF) The IETF standard for CIDR notation and how address blocks are divided.
- RFC 1918: Private address space (IETF) The ranges of private IP addresses meant for home and office networks.
- Number Resources (IANA) The body that hands out IP address blocks worldwide.
More Internet & Network Tools
Other free tools for the same kind of job.
- Internet Speed Calculator Turn a connection speed into real download times. Open tool
- Bandwidth Calculator How much bandwidth your traffic actually needs, including the peak. Open tool
- Browser Information Checker Everything your browser reports about itself. Open tool
- CIDR Calculator Turn a CIDR prefix into a mask, a host count and a usable range. Open tool
- Download Time Calculator How long a file really takes, with protocol overhead counted. Open tool
- IPv4 Calculator Work out everything about an IPv4 address and its subnet. Open tool
- IPv4 to IPv6 Converter Every way an IPv4 address can be written in IPv6. Open tool
- IPv6 Calculator Expand, compress and subnet an IPv6 address. Open tool
- MAC Address Lookup Find the manufacturer of a MAC address, with every notation and what its bits mean. Open tool